Extech Instruments 420 Specifikace stáhnout pdf (Strana 91)



91

V5.1‐March2010



To measure AC current larger than 400 mA, perform the following:

5. Press the A key and use the SET key to select the ACA mode (ACA symbol will

appear at the top of the screen when selected)

6. Press the F5 soft-key to select the 10A measurement mode, the unit of measure

on the main reading screen should be A

7. Connect the red and black test leads to the measured points on the circuit under

test; The AC current value will be displayed on the screen.

8. Press the F4 soft-key to return to the mA measurement mode

Refer to the example in Figure 11.

Figure 11: AC Current Measurement for 10A

FREEZING THE READINGS (DATA HOLD)

You can hold the displayed readings at any time.

1. Press the RUN /STOP key to freeze the screen. STOP will be displayed at the

top right of the screen

2. Press the RUN /STOP key again to resume normal measurement operation

Refer to the example in Figure 12.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 108 109

Žádné komentáře

Extech Instruments 420 Specifikace Strana 91